Freightliner M2 Fault Codes List. Ask your freightliner code 25 car and truck question. The hydraulic pressure sensor circuit is open.
Your engine also requires a sufficient amount of oil. The hydraulic pressure sensor circuit is open. • pressure feedback circuit including the ground.
Pto And Fire Pump Control J1939 Fault Codes.
Low oil level warning light: The only one i did not take a snapshot of was the last one which showed and id of 1 but i do not remember the fm number. Suspect ecu is at fault if the problem persists.
Don't Forget To Like And Subscribe!
157 total pressure feed system injectors inj metr rlprs inj metr press. Wiring, connectors, intake manifold air control valve, ecm: I would appreciate any feed back on this if you have anything.
52 Temperature Intercooler Interclr Temp Intercool Temp.
Bulkhead module fault code information. 0 sam chassis can fault codes 6. Had active code spn 520506 fmi 2.
Even If The Harness Is Intact, Remove It And Then To Reseat It Just To Be Sure.
This code is generated by the ecm, and the fault in question is labeled as 2003, which is located in the tcm. No voltage at either pin. For example, a normally closed solenoid is off, but air pressure is detected.
2006 Freightliner M2 Code Bh 164 Don't Star Engine I Don't Now Why !!!
53 syncro clutch synchro clutch synchronizer clutch. The hydraulic pressure does not increase even though the hydraulic pump is activated. 156 total pressure distribution system nozzle aux in / out # 1 inj time press.